Сontrol valve Clack WS 3 (V3-DT)

CLACK WS3 (V3-DT)

Reagent control valve Clack WS 3 (V3-DT) - automation for high performance softener. The output for regeneration can be configured in various ways - immediate flow rate, delayed flow rate and timer. It is possible to start manual regeneration (as with every controller from Clack). The direction of flow during regeneration is down flow. Valve seating on the filter housing - top / side. The size of the water pipe (distributor) is 90 mm. The diameter of the salt line is 1 ". The drainage line is 3".

Manufacturer: Clack Corporation
Model: Clack WS 3 DT
Body Material: Lead Free Brass / Bronze
Diameter for connection (input / output), inch: 3 ”Female BSPT or NPT
Drain Diameter, inch: 3 ”Female NPT or BSPT
Diameter of the riser, inch: 90mm or 3.5 ”O.D. Pipe 3 ”NPS
Bore Diameter, inch: Quick Disconnect, 6 ”Flange, Side Mount
Nominal water flow, m3 / h: 946 lpm, 56.8 m3 / h
Regeneration Type: Upstream
Controller: Electronic (up to 9 stages of regeneration)
Type of memory: Non-volatile (EEROM, electrically erasable read-only programmable memory)
Reagent Resistance: Sodium Chloride, Potassium Chloride, Potassium Permanganate, Sodium Bisulfite, Chloramines
Housing height from the top of the filter housing, mm: with 6 ”Flange QC Base is 318mm
Range of the applied cases, inch: 18-96 - softening / 18-63 - filtration
Power supply characteristics, V / Hz: 220/50
Operating temperature, degrees Celsius: 4-43
Working pressure, bar: 1.4-8.27
Weight of control valve, kg: 25.9