WS2 CI Filter - Meter (Backwash only) Vadības bloks

The Clack WS 2 "CI valve is an analogue of Fleck 3150 and has high performance. It is equipped with a CI controller where all stages of regeneration can be programmed. A variant of the valve for softeners is equipped with a meter for water passed through the valve. Regeneration output for softeners is via a flow meter, for filters - on the timer. Diameter of a landing thread of the valve - 4 ". The diameter of the plug-in distributor is 2 ". The location of the valve on the filter housing is top. Installations with the Clack WS 2" CI valve are periodic in principle. There is the possibility of combining controllers with each other, for continuous supply of water to the consumer.

Manufacturer: Clack Corporation
Model: Clack WS 2 CI
Body Material: Lead Free Brass / Bronze
Diameter for connection (input / output), inch: 2/2 (Female NPT)
Drain Diameter, inch: 1.5 Female NPT
Water Pipe Diameter, Inch: 1.90 ”O.D.Pipe, 1.5” NPS
Diameter of a landing thread, inch: 4 "
Nominal water consumption, m3 / h: 15.8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: CI (Electronic, up to 9 stages of regeneration)
Type of memory: Non-volatile (EEROM, electrically erasable read-only programmable memory)
Reagent resistance: Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Housing height from the top of the filter housing, mm: 190.5
Range of the applied cases, inch: 12-48 - softening
12-36 - filtering
Power supply characteristics, V / Hz: 220/50
Operating temperature, degrees Celsius: 4-43
Working pressure, bar: 1.4-8.27
Weight of control valve, kg: 29 lbs (12.8 kg)